Mowers, oak leaves, and settling caliche knock heads below grade or crack the body. Mixing a rotor into a spray zone is how you get misting and dry corners. We match body, arc, and nozzle so the precipitation rate stays even across the zone.
Heads in Austin sit in St. Augustine or Bermuda that gets thick in June. If the body is below grade, the spray hits grass blades and never reaches the next head. If it sits high, the mower deck clips it. We set the new body flush with the soil, not with last year's thatch.
A rotor dropped into a spray station is a common DIY leftover in Pflugerville and Round Rock. Precipitation rates do not match, so one corner floods and one stays brown. We put the same family of nozzles on the whole run.
Oak leaves pack around the stem. We clean it, replace the screen if it is packed with grit, and aim off sidewalks and siding. Overspray on an Austin Water schedule is wasted days, not just wasted gallons.
What we look for
- Heads stuck up after the cycle
- Geysers or sideways spray
- Missing nozzles or cracked caps
- Heads buried under mulch or leaf litter
On the visit
- Identify type, arc, and nozzle on the zone
- Set the new head to grade
- Match precipitation rate across the run
- Aim off sidewalks, fences, and house siding
Related
From the blog